LED 6W RGB+CCT Smart Garden Light

Synchronisation of smart garden lights with a remote controller.

There are two types of remote controller available, wall mounted and hand held. The synchronisation process for both controllers is the same and pretty straightforward. Please see the image below of 8 zone remote controller that allows you to light 8 different zones of the garden with one single remote.

The colour ring on the remote controller allows you to control the colours of your lights and 2 sliders below the ring helps you to adjust the brightness and saturation. The remote controller has 6 single buttons and 8 double buttons with “I” to turn on the lights and “O” to turn off the lights that allows you to control the zones individually.

Synchronisation process

Firstly, make sure to put 2 X AAA batteries in your remote controller. The batteries are not included with any of the remote controller and smart panel controllers.

Turn on the power of your smart garden light and quickly press one of the “I” zone button located on the remote controller for 3 times within 3 seconds. If the synchronisation went smoothly, the smart garden light will flash 3 times and you are good to go. If the synchronisation failed and the light didn’t flash, please repeat the process.

How to unlink colour changing smart garden lighting products?

If by mistake you have linked the lights to the wrong zone and you want to unlink them, just simply switch the power OFF of the specific light for 15 seconds, then switch the power back ON and quickly press the “I” zone button 5 times. The light will blink red and that is a sign of unlinked light.

If you have any question or have any problem with the colour changing smart garden lights, please don’t hesitate to contact us.

Please check this article for detailed information.