Description
LED 30W RGB+CCT Smart Garden Floodlight
Product Description
This cutting edge IP65 rated LED 30W RGB+CCT smart garden floodlight with a wide 160 degree beam angle provides expansive coverage. Whether you want to highlight key features or provide general light, this floodlight delivers consistent and reliable light for maximum visibility. Its wide beam angle ensures that every corner of your outdoor space is bathed in bright, uniform light. Access an extensive palette of 16 million colours to create beautiful lighting displays that suit any mood or occasion. From vibrant hues to subtle tones, this floodlight transform your outdoor space into a delightful oasis of light and colour.
Features
- Professional heat sink design.
- 160° beam angle.
- 16 million colours.
- Brightness and colour temperature adjustable.
- Saturation adjustable.
- Remote & app control.
- Voice control compatibility.
- High lumen LED chips.
- Optical lens.
Technical Specifications
Power – 30W
Input voltage – AC100~240V 50/60Hz
Dimensions – 167x200x40mm
Colour temperature – 2700K~6500K
Luminous flux – 3300LM
Luminous efficiency – 110LM/W
Standby power consumption – 1.2W
CRI – >80
PF – >0.9
Beam angle – 160°
IP rating – IP65
RF – 2.4GHz
Control distance – 30m
Take full control of your lighting experience with advanced brightness and saturation control features. Fine tune the intensity and richness of colours to achieve the perfect ambiance, ensure that your outdoor space reflects your unique style. This smart garden floodlight can be controlled with 2.4GHz remote control and smartphone app. Furthermore, it smoothly integrates with third party voice control platforms, allows you to operate your lights with simple voice commands. Dust tight and protected against water, you can trust that your floodlight will continue to shine bright, rain or shine, year after year.
LED 30W smart garden floodlight signal transmitting feature
One LED floodlight can transmit the signals from the remote control to another floodlight within the range of 30m. The remote control distance can be limitless.
LED 30W garden floodlight modes synchronisation feature
Different LED floodlights can work synchronously when they are started at different times, controlled by the same remote, under same dynamic mode and within 30m distance.
Download Spec Sheet
Note: This smart garden floodlight require RGB + CCT remote control or smart panel control (sold separately).
For further information on how to sync this smart garden light with remote control or smart panel control, please check this article and also visit our Facebook for regular updates.
Controls
Synchronisation of smart garden lights with a remote controller.
There are two types of remote controller available, wall mounted and hand held. The synchronisation process for both controllers is the same and pretty straightforward. Please see the image below of 8 zone remote controller that allows you to light 8 different zones of the garden with one single remote.
The colour ring on the remote controller allows you to control the colours of your lights and 2 sliders below the ring helps you to adjust the brightness and saturation. The remote controller has 6 single buttons and 8 double buttons with “I” to turn on the lights and “O” to turn off the lights that allows you to control the zones individually.
Synchronisation process
Firstly, make sure to put 2 X AAA batteries in your remote controller. The batteries are not included with any of the remote controller and smart panel controllers.
Turn on the power of your smart garden light and quickly press one of the “I” zone button located on the remote controller for 3 times within 3 seconds. If the synchronisation went smoothly, the smart garden light will flash 3 times and you are good to go. If the synchronisation failed and the light didn’t flash, please repeat the process.
How to unlink colour changing smart garden lighting products?
If by mistake you have linked the lights to the wrong zone and you want to unlink them, just simply switch the power OFF of the specific light for 15 seconds, then switch the power back ON and quickly press the “I” zone button 5 times. The light will blink red and that is a sign of unlinked light.
If you have any question or have any problem with the colour changing smart garden lights, please don’t hesitate to contact us.
Please check this article for detailed information.
Reviews
There are no reviews yet.